UserName
A combination pH electrode with PEEK plastic shaft for chemical and mechanical durability, and a fixed cable. Designed for use in a variety of applications.
Diameter (English) | 0.47 in. |
---|---|
Length (Metric) | 120 mm |
pH Range | 0 to 14 |
Diameter (Metric) | 12 mm |
Membrane | U Glass |
Filling Solution Type | Xerolyt Polymer |
Material | PEEK |
Temperature (Metric) Operating | 0°C to 100°C |
Internal Reference | ARGENTHAL |
Use these pH electrodes for portable measurement and routine measurement in the lab. WTW™ SenTix™ 41 pH Electrodes are ideal for applications where reliable measured values are needed under adverse conditions.
Fisherbrand™ accumet™ AE series pH electrodes support the accumet™ AE150 pH meter for routine pH measurements at a budget-friendly price.
A combination pH electrode with an integrated temperature sensor and chemically resistant HA glass body. It is designed for general lab applications and ideal for use at high pH values (IP67 rated).
Type | Combination Electrode |
---|---|
Temperature (Metric) Range | 0°C to 100°C |
pH Range | 0 to 14 |
Membrane | HA Glass |
Material | Glass |
Junction | Ceramic |
Temperature (Metric) Operating | 0°C to 100°C |
Designed for measuring in small or narrow neck vessels or test tubes
Fisherbrand™ accumet™ AE series pH electrodes support the accumet AE150 pH meter for routine pH measurements a budget-friendly price
Type | pH Electrode |
---|---|
Length (Metric) Cable | 1 m |
pH Range | 0 to 13 |
Diameter (Metric) Cap | 9.5 mm |
Material | Glass |
Junction | Ceramic Single, 15 to 20 ÎĽL/h |
Temperature (Metric) Operating | -5°C to +100°C |
Connector Types | 3.5 mm Jack |
Quickly, simply, accurately and economically measure free fluoride ions in aqueous solutions.
Diameter (English) Body | 0.51 in. |
---|---|
Length (Metric) Cable | 1m |
Length (Metric) | 110mm |
For Use With (Equipment) | ISE Meter |
Temperature (English) Operating | Continuous: 32 to 176 °F; Intermittent: 176°F to 212°F |
Refillable | Yes |
Length (English) | 4.33 in. |
Length (English) Cable | 39 in. |
Material | Epoxy |
Filling Solution Type | 900061 (9609BNWP and 960900); 900001 with 900100 single junction reference electrode (9409BN, 9409SC, and 940900) |
Temperature (Metric) Operating | 0°C to 80°C (Continuous), 80°C to 100°C (Intermittent) |
Diameter (Metric) Body | 13mm |
pH electrodes designed for small sample volumes or for measuring in small containers.
Type | Combination Electrode |
---|---|
Response Time | <20 sec. |
Offer outstanding price/performance ratio. Mettler Toledo Economy Series pH and pH/ATC Combination Electrodes are cost-effective alternative for less-demanding requirements.
Temperature (Metric) Range | 0°C to 100°C |
---|---|
Temperature (English) Operating | 0°F to 176°F |
For Use With (Equipment) | pH meter |
Length (English) Cable | 47 in. |
Temperature (Metric) Operating | 0°C to 80°C |
Connector Types | BNC |
Achieve accurate measurements from ultrapure water, sea water, and more with these versatile 2-cell conductivity electrodes, available in a variety of materials and measurement ranges.
Type | 2-Electrode Conductivity Cells |
---|
Optimal for lab use and precise Q.C. measurements.
mV Range | 0 to ±25 mV |
---|---|
Length (Metric) | 102 mm |
Temperature (English) Operating | 32°F to 212°F |
pH Range | 0 to 14 |
Response Time | <10 sec. |
Length (English) | 4 in. |
Material | Glass |
Temperature (Metric) Operating | 0°C to 100°C |
Internal Reference | Ag/AgCl |
Fast, accurate response despite temperature changes
Diameter (English) | 0.4 in. |
---|---|
pH Range | 0 to 14 |
Diameter (Metric) | 10 mm |
Filling Solution Type | Saturated KCl |
Junction | Dual Ceramic |
Internal Reference | Ag/AgCl |
Measure flat, soft, moist, semi-solid or small volume samples with epoxy body flat surface pH electrodes.