Tubes

Axygen™ MaxyClear Snaplock Microtubes, 1.5mL

Ensure an efficient seal that stays closed during centrifugation. Axygen™ MaxyClear Snaplock Microtubes, 1.5mL provide excellent visibility and feature a piercing port for syringe access. Available in a wide variety of colors. Maxymum Recovery™ and sterile options available. X500 1.5ML TUBE BOIL PROOF ASS

Falcon™ 50mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 16,000 RCF in a fully supported rotor with room temperature water. Corning™ Falcon™ 50mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients. X500 FALCON POLYPROPYLENE CONICAL CENTRIFUGE

Falcon™ 15mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 12,000 RCF (polypropylene) or 1,800 RCF (polystyrene) in a fully supported rotor with room temperature water. Corning™ Falcon™ 15mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients. X500 Conical Bottom Centrifuge Tube, High Clarity

Invitrogen™ RNase-free Microfuge Tubes, 1.5mL

Autoclavable X500 RNASE-FREE MICROFUGE TUBES (1.5ML) STORE ATroom temperature

Thermo Scientific™ Nunc™ 15mL & 50mL Conical Sterile Polypropylene Centrifuge Tubes

Increase traceability of samples with one of the largest writing areas on the market when using these 15mL & 50mL conical sterile polypropylene centrifuge tubes. X500 Centrifuge tube Thermo Scientific Nunc conicaRöhrchen PP, Deckel HDPE (PU=500 pcs)

Fisherbrand™ Reusable Glass Tubes with Phenolic Screw Caps

Phenolic screw cap with white rubber liner x250 CULT TUBE SC CAP 16X125MM M/CS

Falcon™ Round-Bottom Polystyrene Tubes

Constructed of optically clear polystyrene for easy viewing of sample. Corning™ Falcon™ Round-Bottom Polystyrene Tubes are widely used and referenced in laboratory protocols. X500 Round Bottom Test Tube, PS, 16ml, Screw Cap,

Wilmad™ Thin Walled High Throughput NMR Tubes

Possess an average camber of 60 microns to guarantee the clarity of the spectrum for small molecule (MW<250) samples up to 600 MHz. Wilmad Thin Walled High Throughput NMR Tubes are designed for routine use in most low to mid field NMR spectrometers. 100PK Bruker SampleJet NMR Tube, 5mm

Eppendorf™ Snap-Cap Microcentrifuge Flex-Tube™ Tubes

Choose from six colors, including amber for light-sensitive samples X500 02550-07 EPPENDORF TUBES EW-02550-07 Eppendorf Microcentrifuge Tubes, capacity, 1.5-mL, 500/pac

Thermo Scientific™ Screw Cap Micro Tubes

Pure Protection: Prepare, transfer and store samples securely with Thermo Scientific Screw Cap Microtubes. Available in multiple volumes, packaging options and clean claims.

X500 MICROCENTRIFUGE TUBES MBP NON-STERILE, CONICAl, without cap polypropylene RNase/DNase,RNA/DNA,

Falcon™ Polypropylene Centrifuge Tubes

Manufactured from polypropylene for high chemical and thermal resistance. Corning™ Falcon™ Polypropylene Centrifuge Tubes are tested to withstand 7500 x g centrifugation. X48 CONICAL CENTRIFUGE TUBES 175ML PACK 48

Pyrogen-free Test Tubes

Recommended for use as reaction tubes in gel clot assays.  Lonza™ Pyrogen-free Test Tubes Product  are made from USP Type 1 flint borosilicate glass and contain less than 0.005 EU/ml endotoxin. X50 Pyrogen-Free Test Tubes 10x75mm w/Caps

Corning™ Polypropylene Centrifuge Tubes

Manufactured from clear polypropylene for superior chemical resistance. Corning™ Polypropylene Centrifuge Tubes are an ideal solution for centrifuge needs. X36 Centrifuge tube PP sterile 500 ml plug seal cap max RCF 6000 6/bags

Fisherbrand™ Disposable Borosilicate Glass Tubes with Polypropylene Screw Cap

Provides chemical stability and biological inertness of hard, borosilicate glass at price of disposable tubes X500 Tube, thread PP lock 20X125MM

Thermo Scientific™ Nunc™ 200mL Centrifuge Tube

Process large batches more easily with Nunc 200mL centrifuge tubes, which are made from high-purity resins and can resist forces up to 7000 RCF. X48 Centrifuge tubes Nunc radiation sterilized /

BrandTech™ BRAND™ Non-Sterile Microcentrifuge Tubes

Fits most common rotors and may be spun up to 30,000 RCF. BrandTech™ BRAND™ Non-Sterile Microcentrifuge Tubes are highly translucent and free from flash, air bubbles, and streaks. Polypropylene flat snap caps form a tight, leak-free, easy-open seal. Tubes have a uniform wall thickness for consistent, repeatable results. X500 Disposable microcentrifuge tube, PP 1,5 mlorange lid RCF max.20000 at 20°C

DWK Life Sciences Kimble™ Kontes™ Brand 5mm High Grade NMR Sample Tubes

Each tube meets rigid specifications for wall thickness, variation and camber so as to assure precise measurements and reproducibility. X5 TUBE RMN 5MM 150MHZ BORO3.3A 7

DWK Life Sciences Kimble™ KIMAX™ 100mL California Centrifuge Tube with Red Stripe

KIMAX™ conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. X12 Centrifuge tube, 100ml with red stripeand graduation

Applied Biosystems™ MicroAmp™ 8-Tube Strip, 0.2mL

Tubes precisely fit industry standard well spacing 125 Strips 200UL MICROAMP 8-TUBE STRIP,0.2ML STOREat room temperature

Fisherbrand™ Disposable Borosilicate Glass Tubes with Threaded End

Available with or without marking spot X1000 Tube, threaded, uncovered, 13X100MM

Fisherbrand™ Easy Reader™ Conical Polypropylene Centrifuge Tubes

Imprinted clear black graduations ensure accurate readings X500 Centrifuge Tube, PP, 15ml, Flat Top, packed in sleeve

Thermo Scientific™ 0.2 mL Strip Tubes

Optimize PCR and qPCR with these 0.2 mL strip tubes, available as 8 tubes per strip in several colors or 12 tubes per strip. PCR Strip Tubes, 0,2ml, w/Flat Caps,Assorted Colors (VE=250Stck.)

Thermo Scientific™ Nalgene™ High-Speed Polycarbonate Round Bottom Centrifuge Tubes

Repeatedly centrifugalize samples successfully thanks to the outstanding mechanical strenghth and high optical clarity of these polycarbonate round-bottom centrifuge tubes. X10 CENTRIFUGE TUBE PC 16 ML

Eppendorf™ Eppendorf Tubes™ Conical Tubes

Use these tubes for the simple and safe processing of sample volumes up to 5.0mL. Eppendorf Tubes™ represent the perfect option for working with medium–sized sample volumes. X200 Eppendorf Tubes 5,0 mL, PCR clean,

Thermo Scientific™ Nalgene™ Oak Ridge High-Speed Polycarbonate Centrifuge Tubes

Perform a plethora of applications thanks to the excellent mechanical strength of Thermo Scientific™ Nalgene™ Oak Ridge High-Speed Polycarbonate Centrifuge Tubes. X10 TUBES CENTRIFUGE OAK RIDGE 30ML PC PP SCREW

Corning™ Centrifuge Tubes with CentriStar™ Cap

Features CentriStar™ caps with an easy-on/easy-off flat top and offers advanced ergonomics with wider knurls and roll-over edge design for easier gripping. Corning™Centrifuge Tubes with CentriStar™ Caps leak-proof design comes with a revolutionary plug feature that virtually eliminates all seepage when used under recommended conditions. X300 Centrifuge tube 50ml, conical bottom, flat cap, Sterile, 25/Dual Rack

Thermo Scientific™ 0.5 mL Individual Tubes

Minimize sample loss with the “snap shut” lids on these individual 0.5mL tubes for PCR applications. X1000 PCR TUBE 0,5ML FLAT ASSORTED(VE=1000Stck.)

Thermo Scientific™ Nalgene™ Oak Ridge High-Speed Centrifuge Tubes

Conduct high-speed centrifugation of aggressive chemicals with these tubes, suited for chloroform and phenol extractions in refrigerated machines up to 50,000 x g. X2 Centrifuge tube Oak Ridge FEP autoclavable 30mL

Axygen™ MaxyClear Snaplock Microtubes, 2.0mL

Ensure an efficient seal that stays closed during centrifugation. Axygen™ MaxyClear Snaplock Microtubes, 2.0mL provide excellent visibility and feature a piercing port for syringe access. Available in a wide variety of colors. Maxymum Recovery™ and sterile options available. X500 2ML TUBE BOIL PROOF RED

Falcon™ Round-Bottom Polypropylene Tubes

Manufactured from polypropylene for excellent chemical and thermal resistance. Corning™ Falcon™Round-Bottom Polypropylene Tubes are tested to withstand 3000 x g centrifugation. X1000 Round Bottom Test Tube, PP, 14ml, No Cap, No

  spinner