Chromatography Instruments

GE Healthcare Cassette for Fraction Collector

For use in the ÄKTA avant built-in fraction collector or with the Fraction Collector F9-C for the ÄKTA pure. GE Healthcare™ Cassette for Fraction Collector holds up to 24 x 8mL tubes. X2 Cassette for 8mL tubes for AKTA(TM)avant 25

Thermo Scientific™ Liner sealing Ring for TRACE PTV Injector

Match the best sealing ring with the injection port liner used in your Thermo Scientific™ or Agilent GC system.

X2 SEAL LINER RING GRAPHITE FORTrace GC PTVinlet (pack of 2)

Merck™ MilliSolve™ System

Accessories for filter holders for sample preparation. Millisolve Filtration System Complete With 2l Flask

GE Healthcare Acrylic Plastic Thermostat Jacket

THERMOSTAT JACKET TUBE XK26/4026, 70 cm jacket, 1 pc.

Superloop™ Glass Tubes

Replacement part for Superloop™ assemblies. GE Healthcare Superloop™ Glass Tubes are graduated borosilicate tubes with thread and groove for use in either 10mL or 50mL Superloops. GLASSTUBE (10 ML)

GE Healthcare INV-907 Injection Kit

Range of manual and automated valves to meet variety of performance requirements. INJECTION KIT INV907

Thermo Scientific™ POROS™ XQ Strong Anion Exchange Resin

POROS XQ is a high-capacity, high-resolution, salt-tolerant resin that enables >140 mg/mL dynamic binding capacity while delivering exceptional separation performance 50ML POROS XQ RESIN

Thermo Scientific™ Valco Accessories

X10 Nut Thermo Scientific standard stainless

Thermo Scientific™ Injection Port Liners for Agilent instruments

Use these injection port liners to optimize performance of Agilent GC instruments. X25 GC INJECTION PORT LINERS 4.0Stück

Thermo Scientific™ Rheodyne™ Sample Loops

Thermo Scientific™ Rheodyne Sample Loops are for Rheodyne sample injectors in stainless steel or biocompatible PEEK. DOCUMENTATION SD W/INTEGRATED SD-CARD SLOT, 1024 MB SD-CARD

Thermo Scientific™ Dionex™ Fused Silica Tubing

Thermo Scientific™ Fused Silica Tubing provides excellent chemical durability and inertness. FUSED SILICA TUBING 150µMX5M

Thermo Scientific™ LinerGOLD™ GC Liners

Use the gold-standard LinerGOLD™ GC Liners for consistently high accuracy, sensitivity, and precision in your gas chromatography (GC) analysis.

X5 LinerGOLD Split Liner 1x6.3x78.5mm

Thermo Scientific™ GC Injection Port Base Seals for Thermo Scientific™ and Agilent Instruments

Ensure optimal GC analysis by using the exceptional sealing and inert properties of Thermo Scientific™ GC Injection Port Base Seals.

X2 Siltek Inlet Dichtungen, For Agilent GC's, 0.8mm,

Thermo Scientific™ Rheodyne™ Stators

Use these Thermo Scientific™ Rheodyne™ Stators for your Rheodyne Sample Injectors. Stator for 7410/7413

Thermo Scientific™ Dionex™ Fingertight Fitting with Double Ferrule

Thermo Scientific™ Dionex Fingertight Fitting with Double Ferrules are for older generation nano and capillary LC systems. FTG FTIGHT W DBL FERRULE

Thermo Scientific™ Bottom-of-the-Bottle™ Solvent Filters

Protect your HPLC system with Thermo Scientific™ Bottom-of-the-Bottle™ Solvent Filters. PEEK BOTTOM-OF-THE BOTTLEFLTER SMALL NECK FOR 1/8'' TUB.

Thermo Scientific™ Valco Injector, Model C6W

INJECTOR VALCO C6W 6 PORT,manual 20µL loop 0.016 inch ports

Thermo Scientific™ GC Liner Sealing Rings for Thermo Scientific™ and Agilent Instruments

Match the best sealing ring with the injection port liner used in your Thermo Scientific™ or Agilent GC system.

X1 Liner Sealing Ring for PTV

Thermo Scientific™ Acclaim™ Guard Holder and Coupler

Use the Thermo Scientific™ Guard Holder and Coupler for your Thermo Scientific™ Acclaim™ Guard columns. They can be purchased separately or as a kit.  GUARD HOLDER-COUPLER KIT V-2

Thermo Scientific™ POROS™ XS Strong Cation Exchange Resin

POROS XS is the first high-capacity, high-resolution resin that allows loading to >100 mg/mL in the presence of 15 mS/cm NaCl, while delivering unprecedented separation capability 50ML POROS XS RESIN

Thermo Scientific™ Rheodyne™ 7725 and 7725i Sample Injectors

Ensure accurate, precise HPLC injections and protect against pressure shock with the dual-mode Thermo Scientific™ Rheodyne™ 7725 and 7725i Sample Injectors.

SAMPLE INJECTOR RHEODYNE 7725Imake-before-break design stainless steel dual,

Thermo Scientific™ POROS™ MabCapture™ A/G Select

MabCapture A/G Select allows antibody purification with high dynamic binding performance at low linear flow rates and maintains superior binding capacity at high linear flow rates 50ML POROS MABCAPTURE A/G SELECT

Thermo Scientific™ Cheminert™ Model C2 Microbore Injectors

Use Thermo Scientific™ Cheminert™ Model C2 Microbore Injectors as injectors or switching valves. Cheminert C2, 5µL, Microelectric 6 Port

Thermo Scientific™ Rheodyne™ Ports for Injector Models 7010 and 9010

Use these ports for your Thermo Scientific™ Rheodyne™ 7010 and 9010 Sample Injectors for HPLC. NEEDLE PORT PEEK (FOR 9010)

Thermo Scientific™ Injection Port Liners for Thermo Scientific Instruments

Highly deactivated and produced to exacting tolerances to ensure a high degree of reproducibility. X25 SSL Inj Port Liner,Thermo3mm, 105mm, Pk25

Thermo Scientific™ Injection Port Liners with CarboFrit for Thermo Scientific™ Trace and Focus SSL Instruments

Ensure a high degree of reproducibility with Thermo Scientific Injection Port Liners with CarboFrit for Thermo Scientific Trace and Focus SSL Instruments.

X5 INJECTION PORT LINER SPLIT,

Thermo Scientific™ Dionex™ Universal Fingertight Fitting

The Thermo Scientific™ Dionex Universal Fingertight Fitting has a one-piece design with an extra-long body. X2 Fingertight fitting Thermo Scientific Dionex

Thermo Scientific™ Cheminert Model C2 Microbore Injector

Can be used as an injector or switching valve SAMPLE INJECTOR LOOP PAEK 10µL

Thermo Scientific™ Dionex™ PEEK Universal Fitting for Switchos

X2 Universal fitting Thermo Scientific Dionex

Thermo Scientific™ RheBuild™ Kits

Everything you need to maintain your Thermo Scientific™ Rheodyne™ valves and injectors in your HPLC system. RHEBUILD KIT

  spinner