Få mere at vide
Invitrogen™ Countess™ Reusable Slide and Holder, 1 holder
Beskrivelse
The Countess Chamber Slides are designed for use with the Countess 3 and 3FL automated cell counters.
The disposable Countess Cell Counting Chamber Slides offer convenience in automated cell counting for processing multiple cell samples, busy cell culture facilities, and easy disposal of contaminated or hazardous samples. They also eliminate the risk of contamination from residual samples. After use, Countess slides can be disposed of as standard biohazard waste.
The Countess Reusable Slide is a green and cost-efficient alternative to disposable slides for automated cell counting. The reusable slide enables researchers and cell culture facilities to reduce costs and generate less waste per year, making it affordable for labs to automate their cell counts. The reusable slide is cleaned and dried between counts, just as with a hemocytometer.
Each Countess Cell Counting Chamber Slide has two separate, enclosed chambers for counting one sample in duplicate or two different samples. Cell counting occurs in a central location of the counting chamber. The volume counted is 0.4 μL, the same as counting four 1-mm2 squares in a standard hemocytometer.
The Countess Automated Cell Counter works in three simple steps:
- Mix 10 μL of sample with 10 μL of a cell viability stain or other desired reagent, including ReadyCount™ stains, and pipet into a Countess chamber slide
- Insert the slide into the instrument
- Press 'Count'
That's it—get the total cell count, percent viable cells, and average cell size in as little as 30 seconds.
Tekniske data
Tekniske data
| Type | Slide Holder |
| Product Line | Countess |
| Compatibility | Countess™ Reusable Slide (Cat. No. A5750) |
| For Use With (Equipment) | Countess II FL, Countess 3 & Countess 3 FL Automated Cell Counters |
| Content And Storage | Countess™ 3 and 3 FL Reusable Slide Holder, 1 each |
| Quantity | 1 Holder |
Frequently Asked Questions (FAQs)
The Countess Reusable Slide (Cat. No. A25750) is compatible with the Countess II FL and the Countess 3/3 FL instruments. However, they require a reusable slide holder specific to the instrument. The Countess 3 & 3 FL Reusable Slide Holder (Cat. No. A48208) and the Countess II FL Reusable Slide Holder (Cat No. AMEP4746) are shipped with the instrument and can be purchased separately.
The slide holder can be held inside the back of the instrument, next to the light cube removal tool.
Hausser Scientific Cover Glasses/Slips (Cat. No. 02-617-581) can be purchased through Fisher Scientific; these are 20 x 26 x 0.5 mm borosilicate glass coverslips.
Yes. The Countess 3 & 3 FL Reusable Slide Holder (Cat. No. A48208) be used on a Countess II FL Automated Cell Counter (Cat. No. AMQAF1000).
Yes. The Countess II FL Reusable Slide Holder (Cat no. AMEP4746) can be used on a Countess 3 and 3 FL Automated Cell Counter (Cat. Nos. AMQAX2000 and AMQAF2000).
No. The Countess 3 & 3 FL Reusable Slide Holder (Cat. No. A48208) and the Countess instruments will only work with the Countess Reusable Slide (Cat. No. A25750). Using other slides can damage the instrument, due to differences in the height and width of the slides.
For Research Use Only. Not for use in diagnostic procedures.
Ved at klikke på Send, anerkender du, at du kan blive kontaktet af Fisher Scientific med hensyn til den feedback, du har givet i denne formular. Vi deler ikke dine oplysninger til andre formål. Alle angivne kontaktoplysninger skal også vedligeholdes i overensstemmelse med vores Privatlivspolitik.